广东爱木森压缩机科技有限公司

GUANGDONG AIRMUSEN COMPRESSOR TECHNOLOGY CO., LTD.

0769-83520313

Medium pressure and high pressure Skid-mounted refrigerated dryer with filters

Working principle:
NH series cold dryer uses the refrigeration principle to cool the compressed air so that the moisture in the compressed air is saturated and separated out, and then the condensate is discharged through the automatic discharge device to achieve the drying effect of the compressed air.

 

Operating conditions:
Inlet pressure: 4.0 MPA
Rated pressure: 4.0 MPA
Air inlet temperature: ≤ 45 ℃
Pressure dew point: 3~10 ℃
Ambient temperature: ≤ 45 ℃
Rated ambient temperature: 38 ℃
Cooling mode: air cooling
Refrigerant: R22 (R407C, R410, R134a)

 

Installation method: there is no foundation installation indoors, the plane cement floor, the distance around the cold dryer is not less than 1.5 meters, and the ventilation is maintained on all sides.
 

Technical parameter

 

Model Inlet pressure Capacity Motor power Connection size Product size (MM)
--- MPA PSI M³/MIN CFM KW HP INCH L W H
EAD-1NH 0.6-1.0 88-145 1.6 56 0.375 0.5 RC 1 1440 1180 1220
EAD-2NH 0.6-1.0 88-145 2.4 85 0.75 1 RC 1 1440 1180 1220
EAD-3NH 0.6-1.0 88-145 3.6 128 0.9 1.2 RC 1 1680 180 1400
EAD-6NH 0.6-1.0 88-145 7.2 255 1.5 2 RC 1-1/2 1680 1180 1620
EAD-10NH 0.6-1.0 88-145 11 388 2.25 3 RC 2 1250 650 1030
EAD-13NH 0.6-1.0 88-145 13.8 487 2.625 3.5 RC 2 1250 650 1030
EAD-15NH 0.6-1.0 88-145 17 600 2.85 3.8 DN65 1400 700 1400
EAD-20NH 0.6-1.0 88-145 23 812 3.75 5 DN80 1830 760 1696
EAD-25NH 0.6-1.0 88-145 27 953 4.725 6.3 DN80 1830 760 1696
EAD-30NH 0.6-1.0 88-145 33 1165 5.625 7.5 DN80 1850 960 1900
EAD-40NH 0.6-1.0 88-145 45 1588 7.5 10 DN100 2180 960 1930
EAD-50NH 0.6-1.0 88-145 55 1942 9.375 12.5 DN125 2300 1060 1990
EAD-60NH 0.6-1.0 88-145 65 2295 11.25 15 DN125 2450 1250 2300
EAD-80NH 0.6-1.0 88-145 85 3001 15 20 DN125 2460 1200

2231

 

 

Related products

We will serve you 24 hours a day to ensure your safety in production.

PRODUCTS

We will serve you 24 hours a day to ensure your safety in production.

Why choose us

  • 1.OEM service
  • 2.Direct factory price
  • 3.Sales and after-sales training
  • 4.Technical support

Feedback

Copyright © 2022 LFCMS